MIK-LDG Full bore electromagnetic flowmeter

Full bore electromagnetic flowmeter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions.

Characteristics

Pipe diameter: DN15~DN1000
Accuracy: ±0.5%(Flow speed > 1m/s)
Reliably: 0.15%
Electric conductivity: Water: Min. 20μS/cm; Other liquid: Min. 5μS/cm
Turndown ratio: 1:100

Tel.: +86 15867127446 (WhatApp)

Email : info@supmea.com

Specification

Specification

Product: Electromagnetic flowmeter

Model: MIK-LDG

Diameter nominal: DN15~DN1000

Nominal pressure: DN6 - DN80, PN<4.0MPa; DN100 - DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa

Accuracy: ±0.5%，±2mm/s(flowrate<1m/s)

Repetitiveness: 0.15%

Liner material: PFA, F46, Neoprene, PTFE, FEP

Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium

Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃

Power supply: 100-240VAC，50/60Hz / 22VDC—26VDC

Electrical conductivity: IP65, IP68(optional)

Product standard: JB/T 9248-2015

Features

Benefits

Almost unaffected by fluid properties, it can perform stable measurements under a variety of complex operating conditions
Utilizing a full-bore structure, it has no moving parts and no throttling components
Long-term operation can achieve near-maintenance-free operation
Suitable for measuring pipes from small to large diameters (covering DN2–DN3000 levels)
Bidirectional measurement and strong adaptability
Widely applicable and highly compatible with various industries