MIK-MPP1000 Multi-Parameter Analyzer

Name: SUP-MPP1000 Multi-Parameter Analyzer for Testing pH, ORP, Conductivity, TDS
Brand: Asmik
SKU: 00223
Rating: 4.8 (10075 reviews)

Specification

Introduction

The Multi-parameter analyzer can be widely used in urban or rural water supply plants, tap water pipeline networks, tap water secondary water supply, user taps, indoor swimming pools, online monitoring of water quality such as large-scale water purification equipment and direct drinking water is an indispensable online analysis equipment in the fields of water plant production process control, water conservancy and water management, and sanitation supervision.

Specification

Item	Index	Value
System	working power	(220±22)VAC, (50±1)Hz
	Power	30W
	Cabinet size	800mm506mm180mm (standard version)
	Weight	about 15Kg
	Storage temperature	4℃~+50℃
	Working temperature	4℃~+50℃ / -25℃~+50℃(optional temperature control heating antifreeze module)
	Working humidity	≤95%RH (no condensation)
	Inlet flow	500-1000 mL/min
	Inlet pressure	< 3kg/cm³
	Communication interface	RS-485 Modbus RTU communication protocol + wireless interface
Turbidity	Range	0-1NTU / 0-20NTU / 0-100NTU / 0-4000NTU
	Resolution	0-1NTU / 0-20NTU / 0-100NTU:0.001NTU 0-4000NTU:0.01NTU
	Lower detection limit	0.02 NTU; 0.1NTU (0-4000NTU)
	Zero drift	≤1.5%
	Indication stability	≤1.5%
	Accuracy	2%or±0.02NTU; 2%or0.1NTU（0-4000NTU）
	Repeatability	≤3%
	Response time	T90≤120s
	Recommended maintenance period	3-12 months (depending on the water quality on site)
Residual chlorine/chlorine dioxide	Range	0-5mg/L / 0-20mg/L
	Resolution	0.01mg/L
	Lower detection limit	0.05mg/L
	Accuracy	±0.05mg/L or ±5% (DPD comparison error ±10%)
	Response time	≤120 seconds
	Recommended maintenance period	1-3 months or weekly calibration, 3-6 months to replace consumables
PH /ORP(optional)	Range	0-14 pH, ±2000 mV (ORP)
	Resolution	0.01 pH, ±1 mV (ORP)
	Accuracy	±0.1 pH, ±20 mV (ORP) or ±2%
	Repeatability	±0.1 pH, ±10 mV (ORP)
	Response time	≤60 seconds
	Recommended maintenance period	1-3 months
Temperature	Range	-20℃ - 85℃
	Resolution	0.1℃
	Accuracy	±0.5℃
	Repeatability	≤0.5℃
	Response time	≤25 seconds
	Recommended maintenance period	12 months
Conductivity (Optional)	Range	1-2000uS/cm / 1~200mS/m
	Accuracy	±1.5%FS
	Repeatability	≤0.5%FS
	Response time	≤30 seconds
	Recommended maintenance period	3-6 months
Dissolved oxygen (Optional)	Range	0-20mg/L
	Accuracy	±0.3mg/L
	Repeatability	≤±1.5%
	Response time	≤30 seconds
	Recommended maintenance period	1-3 months
Expansion port	Port type	RS485, 4-20mA

1. What is the MIK-MPP1000 multi-parameter analyzer?

The MIK-MPP1000 is an integrated cabinet analyzer for online water quality monitoring. It can measure turbidity, residual chlorine, pH/ORP, temperature, conductivity and dissolved oxygen in one system, and is used in water supply plants, tap water networks, secondary water supply, user taps, indoor swimming pools, large purification equipment and direct drinking water systems.

2. Which parameters can it measure?

Turbidity: 0–1 / 0–20 / 0–100 / 0–4000 NTU
Residual chlorine or chlorine dioxide: 0–5 mg/L or 0–20 mg/L
pH / ORP (optional): 0–14 pH, ±2000 mV
Temperature: -20 to 85 °C
Conductivity (optional): 1–2000 μS/cm or 1–200 mS/m
Dissolved oxygen (optional): 0–20 mg/L

3. How accurate is each parameter?

Turbidity: 2% or ±0.02 NTU (2% or 0.1 NTU on the 0–4000 NTU range)
Residual chlorine: ±0.05 mg/L or ±5% (DPD comparison error ±10%)
pH / ORP: ±0.1 pH, ±20 mV or ±2%
Temperature: ±0.5 °C
Conductivity: ±1.5% FS
Dissolved oxygen: ±0.3 mg/L

4. Can it measure low turbidity in drinking water?

Yes. The turbidity resolution is 0.001 NTU on the 0–1, 0–20 and 0–100 NTU ranges, with a lower detection limit of 0.02 NTU, zero drift ≤1.5% and indication stability ≤1.5%. It is designed for tap water (0.1–1 NTU) and purified water (0.001–0.1 NTU).

5. How fast is the response?

Turbidity: T90 ≤120 s
Residual chlorine: ≤120 s
pH / ORP: ≤60 s
Conductivity: ≤30 s
Dissolved oxygen: ≤30 s
Temperature: ≤25 s

6. What sample water flow and pressure are required?

Inlet flow: 500–1000 mL/min
Inlet pressure: within the specified limit (approximately below 3 kg/cm²)

Please tell us your sample pressure so we can confirm whether a pressure reducer is needed.

7. What power supply is required?

220 VAC ±22 V, 50 ±1 Hz. Power consumption is 30 W.

8. What are the cabinet size and weight?

Cabinet size: 800 × 506 × 180 mm (standard version)
Weight: about 15 kg

9. Can it be installed outdoors or in cold climates?

The standard working temperature is 4 °C to 50 °C. With the optional temperature-controlled heating and antifreeze module, the range extends to -25 °C to 50 °C, which makes it suitable for outdoor measurement in cold and hot areas. Working humidity is ≤95% RH without condensation.

10. What communication and outputs are available?

RS-485 with Modbus RTU protocol, plus a wireless interface for remote data transmission
Expansion ports: RS485 and 4–20 mA

11. Does it protect itself against leaks?

Yes. Built-in ingress (water leakage) detection and automatic protection help avoid damage from unexpected failures.

12. How much maintenance does it need?

Turbidity: 3–12 months, depending on water quality
Residual chlorine: 1–3 months, or weekly calibration, with consumables replaced every 3–6 months
pH / ORP: 1–3 months
Conductivity: 3–6 months
Dissolved oxygen: 1–3 months
Temperature: 12 months

13. Does residual chlorine measurement need reagents?

The residual chlorine accuracy is specified with a DPD comparison error of ±10%, which refers to comparison with the laboratory DPD method. Please contact us to confirm the measuring method and the consumables required for your configuration.

14. Can the analyzer be customized?

Yes. The MIK-MPP1000 supports customization including trademark, name and cabinet appearance, which is useful for OEM partners, system integrators and utilities.

15. Why choose an integrated multi-parameter cabinet instead of separate instruments?

One cabinet measures several parameters from the same sample, which improves data consistency, reduces installation and maintenance costs, increases system integration and supports long-term automated operation.

16. How is the MIK-MPP1000 different from the MIK-MPP500 and MIK-MDX100?

MIK-MPP1000: 800 × 506 × 180 mm cabinet; turbidity up to 4000 NTU; optional heating module for -25 °C; optional pH/ORP, conductivity and dissolved oxygen.
MIK-MPP500: economy cabinet (500 × 400 × 200 mm) with colour touch screen; turbidity up to 2000 NTU; optional pure water conductivity sensor.
MIK-MDX100: compact wall-mounted analyzer for up to 6 parameters, reagent-free, 24 VDC or 220 VAC, up to 4 analog outputs.

17. How is the analyzer installed?

The MIK-MPP1000 is an integrated cabinet that needs a sample water inlet within the specified flow and pressure range, a drain line and a 220 VAC power supply. Please follow the installation manual or contact us for site-specific advice.

18. Where is the MIK-MPP1000 used?

Typical applications include water plant process control, tap water pipeline networks, secondary water supply, user taps, indoor swimming pools, large purification equipment and direct drinking water systems, as well as water management and sanitation supervision.

19. What information should I provide to get a quotation?

To help us select the correct configuration, please provide: